Search

Valves

Microvalve - MV2

Axxiom’s MicroValve II is one of the most reliable, economical abrasive metering valves available in the industry. It’s a normally-open valve which meters the amount of abrasive let into blast stream with a plunger that can be controlled by manually turning a knob. The body is constructed of rugged, carbon steel, while the base is constructed of hardened steel to increase durability and reduce maintenance and downtime. The MV2 is available in 1 ¼” and 1 ½” versions.

Axiom MicroValve 2 Comparison Chart      Axiom MicroValve 2 Features

Axxiom MicroValve 2 Overview.pdf                     Axxiom MicroValve 2 Parts List.pdf



Thompson Valve II

Axxiom’s Thompson Valve II is the most precise abrasive metering valve available in the industry today. It’s a normally-closed valve which meters the amount of abrasive by moving a piston to a pre-set position when a signal is received from the deadman, allowing abrasive to flow into the blast stream. Using a normally-closed metering valve allows for an abrasive cutoff system to be added to your blasting operation – saving abrasive and compressed air and increasing productivity. The TVII is available with either a tungsten carbide or urethane sleeve. It’s available in 1”, 1 ¼”, and 1 ½” versions.

Axxiom Thompson Valve 2 Comparison Chart.pdf     Axxiom Thompson Valve 2 Features.pdf

Axxiom Thompson Valve 2 Overview.pdf                    Axxiom Thompson Valve 2 Parts List.pdf

ComboValve

With extensive experience and expertise, Axxiom designed the ComboValve to replace the need for two valves - the inlet valve and outlet valve. The advantage is this one valve performs the same function as both valves with fewer moving parts that have the chance to fail. The ComboValve is a normally-closed valve that opens once a signal is received from the deadman, pinching a ¾” blast hose, allowing air to reach the blast pot and pressurize. Once the deadman stops sending the signal, the ComboValve returns to the closed position and allows the blast pot to depressurize through the ¾” blast hose that was pinched off. You won’t find an inlet/outlet valve combination that outperforms the ComboValve!

Axxiom Combo Valve Features.pdf      Axxiom Combo Valve Overview.pdf

Axxiom Combo Valve Parts List.pdf



G2 Deadman Valve


Axxiom’s G2 deadman is the only normally-closed deadman available in the industry today. Having a normally-closed deadman eliminates compressed air being constantly “bled” through the valve that all other manufacturer’s valves are subject to. This leads to decreased response times and signal delays. The fail-safe button that is incorporated into the valve prevents accidental activation of the blast pot and can be configured for either left-hand or right-hand operators.

Axxiom G2 Deadman Valve Features.pdf     Axxiom G2 Deadman Valve Overview.pdf

Axxiom G2 Deadman Valve Parts List.pdf



Thompson Valve I


Axxiom’s Thompson Valve I is a precise abrasive metering valve. It’s a normally-closed valve which meters the amount of abrasive by moving a piston to a pre-set position when a pneumatic signal received from the deadman, allowing abrasive to flow into the blast stream. Due to its popularity and the expiration of the TVI patent, there are many inferior imitations of the TVI in the market today. Do not allow yourself to be fooled by any of them – none are engineered, constructed, or assembled on par with Axxiom specifications and do not operate as efficiently, precisely, or durably as the genuine TVI. The TVI is available with either a tungsten carbide or urethane sleeve. It’s available in 1”, 1 ¼”, and 1 ½” versions.

Axxiom Thompson Valve 1 Overview.pdf      Axxiom Thompson Valve 1 Parts List.pdf 

 

top of page